Split AC removal & install in Al `Ala
Both units and their pipes are taken down, moved to the new address, and fitted back in place.
What sets Al `Ala apart
If you are moving to a new address in Al `Ala and want to take your split AC with you, our split AC removal and installation service removes both units and the pipes from the old place and fits them in the new one. Call or WhatsApp us.
Al `Ala is a district on the edge of Riyadh where homes and villas tend to have more space than a central older area, and AC pipes may need longer runs when moved. Both units and the pipes are removed first, then taken to the new address where they are fitted back, with the pipes joined firmly to prevent refrigerant loss. Each part is wrapped before it travels in the truck or dyna.
Al `Ala is a district on the edge of Riyadh city with homes and villas, nearest to the town of Saad.
Moving a split AC requires careful removal and installation so that the pipes do not leak in transit.
What the service includes
The service takes the split AC from the first wall to the new one.
- Removing the indoor unitLifted off its wall bracket with care, so its surfaces are protected.
- Removing the outdoor unitTaken off its external mount before it is carried, not while it is being lifted.
- Disconnecting the pipesThe pipes connecting the units are separated without sharp bends that could damage them.
- Wrapping both unitsStretch film and cardboard corner guards protect each unit before loading.
- Moving by the dyna truck and the pickupBoth units are loaded onto the dyna truck or the pickup and taken to your address.
- Fitting brackets and both unitsBrackets are fixed in the new position first, then both the indoor and outdoor units are mounted.
- A quoteGiven after you tell us how many units there are and where they are now and where they are going.
How does the split AC job work?
- Tell us what you haveSend photos of the indoor and outdoor units on WhatsApp so we can see how they are mounted and what brackets are in use.
- Both units are taken downThe indoor unit comes off the wall, the outdoor unit comes off its mount, and the pipes between them are disconnected cleanly.
- Wrapped and movedEach unit is wrapped in stretch film with cardboard corners, then loaded onto the dyna truck or the pickup to your new address.
- Fitted in the new positionThe brackets are fixed to the wall first, then the indoor and outdoor units are mounted where you want them.
What protects your AC on the move?
- Stretch film and cardboard corners protect every surface and edge
- The pipes are disconnected carefully to avoid sharp bends
- The outdoor unit comes off its mount before it is lifted, not during
- One number to call or message on WhatsApp
Our work for this service
Real photos of our work
What customers say on Google
Real reviews, word for word
شغل مميز وشكر خاص للأستاذ وليد على التعامل والعمل الراقي ❤️❤️احترافية وكل الاغراض وصلت سليمه وبالوقت الف شكر للاستاذ وليدVery good transportation company, شركة شحن عفش جيدة جداً ادائهم وعملهم ممتازNearby areas for Split AC removal & install
Other services in Al `Ala
Questions about split AC removal & install
What exactly comes apart when a split AC is moved?
The indoor unit is lifted off its wall bracket, the pipes connecting the units are disconnected, and the outdoor unit is taken off its external mount. The brackets themselves are removed if the new position needs them, and each unit is wrapped before it is loaded.
What do I prepare at home before the AC is taken down?
Switch the unit off well before the appointment. Clear the area under the indoor unit and the space around the outdoor unit. Photograph the pipe run and how both units are connected before the job starts; the photos are useful when the units are fitted in the new place.
How do I decide where the indoor unit goes in the new room?
Choose the wall before the fitting day and check that there is enough space between the position of the unit and the ceiling for the bracket. Send a photo of the wall on WhatsApp and we can tell you whether the fit is straightforward or needs extra preparation.
What protects the outdoor unit while it is carried and moved?
The outdoor unit is brought down from its mount as a whole before it is carried. It is then wrapped in stretch film with cardboard corner guards to protect its body and edges. On the dyna truck or the pickup it is placed in a stable position so it does not shift on the way.
Which photos help me choose where the AC goes in my new home?
Photograph the indoor unit on the wall, the pipe run from indoors to outdoors, and the outdoor unit on its bracket. Those photos give you a reference for choosing where each unit goes in the new place and show how much pipe run the new position will need.
Can a split AC be taken down and fitted in a different place in the same home?
Yes, the unit can be moved to a different wall or room in the same home. Send a photo of the AC and a photo of the new wall on WhatsApp, with your address, and we will tell you what is needed.
Do you move split AC units from homes in Al `Ala to another address?
Yes, we remove both units and the pipes, move them and fit them in the new address. Call us and tell us where the units are and how far apart they are.
Do you wrap the AC before moving it in the truck?
Every part is wrapped in stretch film before it leaves its place so it does not rub against walls or other items. The pipes are also wrapped carefully during the move.
